產品行業：制藥機械
產品分類：中試試驗設備
產品摘要 ———
工作原理：幾種物料在鍋體內，攪拌電機通過傳動機構，帶動攪拌槳充分攪拌混合后，再注入一定量的黏結劑（也可一種配方與黏合劑一次性加入容器內），繼續攪拌成濕劑軟材料。然后由側置的刀片高速切割成均勻的濕顆粒。手動打開出料閥，出料。After putting the materials into the pot body, stirring motor starts, driven mixing impeller fully mixed and then injected into a certain amount of binder (can also be a formula with the binder by adding a one-time container), continue to stir the soft moist material . And then by the side of the blade cut into uniform wet high-speed particles. Manually open the valve, the materialYongtai Group
結構特點：攪拌槳葉呈內大外小螺旋狀，適于作圓周運動時，離心力作用下物料分布內少外多的特點，攪拌無死區，物料形成最佳的三向翻騰狀態。
Stirring paddle is spiral fashion , which making a circular motion, the centrifugal force distribution under the less material things and more features, no dead-zone mixing, the material forming the three best state to somersault.
切割刀為整體式，每把刀之間相互成90度布置，切割效率高。
Cutter-type as a whole, between the two knives forming into 90-degree layout, cutting, high efficiency
攪拌傳動密封和切割封采用氣密封，密封圈密封及反螺紋密封相結合的方法，確保細粉料不泄露。
Stirring drive the use of seals and seal cutting gas seal, sealing ring and seal combination of anti-threaded to ensure that materials do not leak powder
開蓋系統的開啟角度大，手感輕便，并可在任何角度停留。
Openings of the open system point of view, and feel light and stay in any point of view
技術參數：
全容積（L） | 10 |
產量（kg/批） | 3 |
主攪拌電機功率（kw） | 0.75/380 |
切割電機功率（kw） | 0.25/380 |
主攪拌轉速（rpm） | 2800 |
副攪拌轉速（rpm） | 910 |
外形尺寸（mm） | 1600x600x1050 |
重量（kg） | 90 |